RFID door locking system with ARDUINO, RC522 and 12v solenoid lock.

Circuit Diagram :       

                         

  Code : 

//G.S Entertainment

//RFID Solenoid Lock

#include <SPI.h>

#include <MFRC522.h>

 

#define SS_PIN 10

#define RST_PIN 9

#define LED_G 5 //define green LED pin

#define LED_R 4 //define red LED

#define RELAY 3 //relay pin

#define BUZZER 2 //buzzer pin

#define ACCESS_DELAY 2000

#define DENIED_DELAY 1000

MFRC522 mfrc522(SS_PIN, RST_PIN);   // Create MFRC522 instance.

 

void setup() 

{

  Serial.begin(9600);   // Initiate a serial communication

  SPI.begin();          // Initiate  SPI bus

  mfrc522.PCD_Init();   // Initiate MFRC522

  pinMode(LED_G, OUTPUT);

  pinMode(LED_R, OUTPUT);

  pinMode(RELAY, OUTPUT);

  pinMode(BUZZER, OUTPUT);

  noTone(BUZZER);

  digitalWrite(RELAY, LOW);

  Serial.println("Please put your card to the reader...");

  Serial.println();

}

void loop() 

{

  // Look for new cards

  if ( ! mfrc522.PICC_IsNewCardPresent()) 

  {

    return;

  }

  // Select one of the cards

  if ( ! mfrc522.PICC_ReadCardSerial()) 

  {

    return;

  }

  //Show UID on serial monitor

  Serial.print("UID tag :");

  String content= "";

  byte letter;

  for (byte i = 0; i < mfrc522.uid.size; i++) 

  {

     Serial.print(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " ");

     Serial.print(mfrc522.uid.uidByte[i], HEX);

     content.concat(String(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " "));

     content.concat(String(mfrc522.uid.uidByte[i], HEX));

  }

  Serial.println();

  Serial.print("Message : ");

  content.toUpperCase();

  if (content.substring(1) == "04 1C 30 BA 06 6C 85" || "E6 D4 61 AF") //change here the UID of the card/cards that you want to give access

  {

    Serial.println("Access Granted");

    Serial.println();

    delay(500);

    digitalWrite(RELAY, HIGH);

    digitalWrite(LED_G, HIGH);

    delay(ACCESS_DELAY);

    digitalWrite(RELAY, LOW);

    digitalWrite(LED_G, LOW);

  }

 

 else   {

    Serial.println(" Access denied");

    digitalWrite(LED_R, HIGH);

    tone(BUZZER, 300);

    delay(DENIED_DELAY);

    digitalWrite(LED_R, LOW);

    noTone(BUZZER);

    }

 }